Delay-off for furnace main blower when using A/C
Re Lennox G23Q2/3-75-2 with HS25-311-1P A/C:
The built-in delay-off for the blower works well with the furnace, but there seems no easy way to set up a delay-off for the blower when using the A/C.
Right now I've connected the low blower wire to the CF terminal on the BCC2 blower control. This at least lets the blower run on low to circulate that expensive amount of cold in the evaporator. Otherwise, the blower shuts down as soon as the A/C compressor is shutdown by the thermostat. Wonder why Lennox didn't build in a delay-off for the A/C. Very energy inefficient!
What is a good way to install a blower delay-off when using the A/C?
Adding a delay-off relay to the BCC2 Y terminal?
Any suggestions?
Thanks