Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Electrical & Lighting (https://www.askmehelpdesk.com/forumdisplay.php?f=105)
-   -   Re-setting Arc Fault Breaker (https://www.askmehelpdesk.com/showthread.php?t=108024)

  • Jul 8, 2007, 07:01 PM
    Hocky
    Re-setting Arc Fault Breaker
    After an electrical storm where elec service was interupted I can not re-set the two Bedroom Arc Fault Breakers. Breakers are mfd by Eaton & has small yellow test button on each. Says type BYAF. All else is well. Home is 1 year old in Florida. Please help.
  • Jul 9, 2007, 01:48 AM
    tkrussell
    I suspect the breaker is defective and needs to be replaced. The unit contains electronic parts that can be easily damaged.
  • Jul 9, 2007, 06:33 AM
    Stratmando
    I would remove wires out of breaker, and see if it will reset.

  • All times are GMT -7. The time now is 02:29 AM.