Hi I have a Whirlpool Dryer - model #LER5636JQ0. I will start to dry, then stop. I open the door, let it cool down, start it again. It will run for a few minutes, then stop. I have to keep repeating the process several times to get it to stay on and even then sometimes it won't.

Please advise what I should do.

Thanks:)

First verify that the vent is open and clear frim insid of dryer all the way out to where it exits house. You can disconnect the vent at bottom back of unit and try a load and see it that makes a difference. We'll proceed from there