My mower is 10-15 years old. The blade drive belt broke, I need instructions on how to put the new one on. A diagram would be great.

Quote:

---

Originally Posted by BOB PRICE

My mower is 10-15 years old. The blade drive belt broke, i need instructions on how to put the new one on. A diagram would be great.

---

I would appreciate a prompt response my grass is looking bad!

The pulleys that are flat receive the outside of the belt and the slotted pulley receives the inside of the belt. Just try to route it with the belt in this type configeration and see what that does. I know this is not a lot of info but the best I can do. If it were a Deere, I could get you up and going.Good Luck

Quote:

---

Originally Posted by esquire1

The pulleys that are flat receive the outside of the belt and the slotted pulley receives the inside of the belt. Just try to route it with the belt in this type configeration and see what that does. I know this is not a lot of info but the best I can do. If it were a Deere, I could get you up and going.Good Luck

---

Thank you Esquire 1 that was very helpful. I tried it and it works.

BOB PRICE

Great. Many times just knowing how it assembles can help solve the problem

Bob, if you need more diagrams check mtd.com