Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Appliances (https://www.askmehelpdesk.com/forumdisplay.php?f=157)
-   -   Appliance installation (https://www.askmehelpdesk.com/showthread.php?t=102287)

  • Jun 18, 2007, 11:02 AM
    soulezoo
    Appliance installation
    We are trying to remove our old over the range microwave to replace it. We can't find any screw or clicks even holding it in place. How do we get it down?
  • Jun 18, 2007, 11:07 AM
    Stratmando
    I would look in cabinet above if one, then, Look carefully at front 4 corners, look through, any opening or hole for Flathead, or other type screw. These are LONG screws, and attach to Back Plate.
  • Jun 18, 2007, 12:20 PM
    wilus67
    What is the proper electrical installation for dryer
  • Jun 18, 2007, 12:22 PM
    wilus67
    What is the proper way to install electrical dryer
  • Jun 18, 2007, 12:32 PM
    esquire1
    wilus67- You probably should start your own thread. But the dryer needs to be properly vented and connected to 240voltage
  • Jun 18, 2007, 12:35 PM
    Stratmando
    Probably should have own post. Basically 3 #10's, or if new or remodel, 4 #10's, On a 30 amp 2 pole breaker.
    Exhaust.

  • All times are GMT -7. The time now is 11:01 PM.