I have a 1990 honda accord with a 2.2 motor with a auto trans. The car starts fine, but when I put my foot on the brake the tech jumps all over the place and the motor starts to run ruff... help please
Thanks
![]() |
I have a 1990 honda accord with a 2.2 motor with a auto trans. The car starts fine, but when I put my foot on the brake the tech jumps all over the place and the motor starts to run ruff... help please
Thanks
Sounds like an idling concern;possible sensor failure.. tps, map, etc. when's the last time you replaced plugs and wires? Does the check engine light come on??Quote:
Originally Posted by mymariners
The wires and plugs are new, yes the check light comes on,, it weird that it runs good until I step on the brake
You need to replace the Ignition Control Module (igniter). Here's what it looks like and costs:
Zip Code Entry at PartsAmerica.com
This should give you a good explanation:
https://www.askmehelpdesk.com/cars-t...tml#post260436
It would be a good idea to replace the coil and rotor, while you have the distributor open. Here's how to do the job yourself:
https://www.askmehelpdesk.com/cars-t...tml#post265896
Could be a vacuum leak in the power brake booster. Have that checked out.
All times are GMT -7. The time now is 08:56 AM. |