Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Computers for Beginners (https://www.askmehelpdesk.com/forumdisplay.php?f=79)
-   -   Chkdsk /f results (https://www.askmehelpdesk.com/showthread.php?t=101116)

  • Jun 13, 2007, 08:57 PM
    Billybonnie
    Chkdsk /f results
    Once in a while, I will run chkdsk /f just to make sure everything is "ok"

    After the scan is finished... it blue screens the results of the scan, but only for 1 or 2 seconds.

    How can I either "pause" or keep the info there long enough to see what was wrong.

    I did a check today, and I saw problums in different sectors, but only for a "flash" of a second, then it auto reboots.

    There has to be a way to get this info, or manualy stop the reboot process after the check

    Thanks.
  • Jun 14, 2007, 12:30 PM
    koolbrew
    Quote:
    Originally Posted by Billybonnie
    Once in a while, i will run chkdsk /f just to make sure everything is "ok"

    After the scan is finished..... it blue screens the results of the scan, but only for 1 or 2 seconds.

    How can i either "pause" or keep the info there long enough to see what was wrong.

    I did a check today, and i saw problums in different sectors, but only for a "flash" of a second, then it auto reboots.

    There has to be a way to get this info, or manualy stop the reboot process after the check

    Thanks.
    When I have problems like that, I take a video with my digital camera and then play it back and pause it. Not a technical answer but the end sometimes justifies the means.

    • All times are GMT -7. The time now is 04:16 AM.