Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Exterior Home Improvement (https://www.askmehelpdesk.com/forumdisplay.php?f=118)
-   -   Replacing RR tie wall with blocks (https://www.askmehelpdesk.com/showthread.php?t=101069)

  • Jun 13, 2007, 06:02 PM
    HOGAN181
    Replacing RR tie wall with blocks
    We have an old railroad tie retaining wall that I would like to replace with decorative blocks of some sort. Can anyone tell me if this project is one better left to the experts or can anyone somewhat comfortable around home improvement projects manage this? I would appreciate some suggestions about where to start and how to extimate the amount of brick I need.
    THANKS!
    Hogan181
  • Jun 14, 2007, 03:33 PM
    glavine
    A Project Like This Is Maybe A Weekend Warrior Project. Id Say Try It. Ive Done A little Myself. Its Just A lot Of Digging, Im Not Much On That.
    When You Pull Up The Rr Ties, Your Steps Will Be Already There To Lay On, You May Want To Add Some Sand Rock To Help Level Out Each Step.
    As Far As Block I Would Assume You Could Find What You'd Need From Lowe's Or Homedepot, Seems To Me Most Of The Landscape Stories Are Just Way Over Priced For The Same Stuff.
  • Jun 21, 2007, 05:33 AM
    roadmanjim
    When I was growing up, we built many stone walls (New Hampshire). One of the lessons that I took away from that experience dealt with the issue of ground water. If there is not sufficient drainage behind the wall, it will become a dam and a cubic foot of water weighs a lot more than a cubic foot of soil. So, do your homework and take steps to allow ground water to escape from behind the wall either out the front or the ends. This was not an issue with the RR ties but could be with bricks.
    Food for thought.
  • Jun 21, 2007, 11:07 AM
    HOGAN181
    thanks so much, both of you! the process seems more involved than I imagined, I may have a problem motivating my hubby for this one! Guess I should look into taking the safe, (although expensive!), way out and hire someone who knows what they're doing!
    Hogan181:rolleyes:

  • All times are GMT -7. The time now is 02:14 PM.