Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Electrical & Lighting (https://www.askmehelpdesk.com/forumdisplay.php?f=105)
-   -   Fan and Light control (https://www.askmehelpdesk.com/showthread.php?t=100381)

  • Jun 11, 2007, 11:31 AM
    Maui
    Fan and Light control
    Is it possible to add a receiver that would split the power (lights and Fan) in the Fan box then use a single gang switch that has the transmitted to control the lights (dim and bright) and fan independent from one another. The only thing I would have to make sure is the fan switch should only be an on and off switch the voltage to the fan can not be varied it has to be a 110 voltage)

    Thanks
    Don Wade
  • Jun 11, 2007, 08:30 PM
    Stratmando
    You can have a light/fan transmitter, and use wires to go to another light, (not attached to fan), So the 2 separate fixtures can be operated with one remote.
    You can have a light/fan controlled by wall transmitter and remote control.
    Don't know if I answered question?
  • Jun 11, 2007, 09:17 PM
    ceilingfanrepair
    Yes you can buy remote/receiver kits that have RF wall switches.

    Ceiling fan remote controls - help and FAQ- Ceiling Fans N More

  • All times are GMT -7. The time now is 09:09 AM.