Im getting ready to take the Indiana pluming test and I was wanting to know how thick the lead
Is suppose to be in the hub of the cast iron.
Im getting ready to take the Indiana pluming test and I was wanting to know how thick the lead
Is suppose to be in the hub of the cast iron.
The 2003 Uniform Plumbing Code says to a depth of not less than one inch.
After caulking, the finished joint shall not extend more than 1/8 of an inch below the rim of the hub.
I'd double check the code book you've trained with, though.
Thanks for the answer I was told 1 inch I just wanted to be sure before I went.
All times are GMT -7. The time now is 09:29 AM. |