Hello and Good Morning.


I have installed a bidet wash in my toilet. It is the one that fits beneath the toilet seat and has a dial on the side that controls water pressure to wash posterior from the nozzle located under the seat. This works perfectly fine but the problem that has resulted from this is that now there is a gap between the toilet seat and the toilet pan due to the bidet being in between. Is there a solution for this apart from getting a bigger pan. Can I use some kind of thing to pack the gap in between the two.


Looking forward to your help.


Thanks

Your best bet is to install a bigger pan. Cheap methods of fixing this problem will only result in future headaches.

I agree with Questionair. A bigger pan would be the best and cheapest solution. Good Luck, Tom