How to reset dsc alarm pc1832
A friend had a problem with there alarm,there is no paper work for this panal and no codes at all,the panel is in a lockable box with no keys.
I have forced the box and the panel inside is a pc1832/1864
I believe to reset the panel you have to short out pgrm1 and z1,I have done this but this has not worked,don't no what else to try and there are at least 4 alarms in the same street with the same fault,can anybody help
Comment on Stratmando's post
I know this is an old thread, but I am having a similar problem. I reset the panel and now it has a default code of 1234 that I can't seem to change. I tried *5,1234,40 (also tried 41), <new code>, ## and it never removes 1234. When I enter the *85555 it does go into a programming mode (which I ## out of).