We have two single phase energy sources. We want to measure the energy flown through these two phases in one meter. Can we use a 3 phase CT meter, connect two CTs to the meter and short the CTs link of the 3rd phase in the meter?
We have two single phase energy sources. We want to measure the energy flown through these two phases in one meter. Can we use a 3 phase CT meter, connect two CTs to the meter and short the CTs link of the 3rd phase in the meter?
I do not believe it would work. Plus, you also need to deal with the PT's, assuming this is a KWH meter.
All times are GMT -7. The time now is 09:02 PM. |