Hi,
I have a weather king propane furnace. I do not know the age. I have a simple dial thermostat. I would like to figure out how to run the blower without the heat. The wires from the thermo going into furnace have the three wires but the green is not connected to anything. The red is connected to the transformer and the white is connected to the device which controls the gas. I have located the fan limit. I do not see any places to connect the green wire.
I am using a woodstove this winter and the cold air return is right next to it. I would like to use it to return warm air to other parts of house by using the blower by itself.
Thanks for your help!
Nate