Dear Sirs,
The hot water supply pipe has pulled away from the diverter on the tub. Is there anyway to repair this without sweating the pipe back into the fitting? Preferably a compression fitting.
Thank you
Dale Scotton
Dear Sirs,
The hot water supply pipe has pulled away from the diverter on the tub. Is there anyway to repair this without sweating the pipe back into the fitting? Preferably a compression fitting.
Thank you
Dale Scotton
Hi Dale. No, if the old joint was a soldered joint and it pulled away due to freezing then the pipe will need to be thawed and re-soldered to fix the issue.
Back to you...
Mark
I agree completely with you, Mark. But there might be hope for another do it yourself fix. If your valve body had copper sweat into it, but the outside of the valve body by any chance has 1/2 inch male thread, you could use a 1/2" female iron pipe by 1/2" push fit, or compression fitting to reconnect without any soldering at all. Maybe show us a pic of what you have to work with and we may be able to help you get this done right quick and easy.
All times are GMT -7. The time now is 11:26 AM. |