Emachine t2885 front panel came off and the power pins came out of the mb and I don't know the order the pw .sw .hdd. Go can some one help me
Emachine t2885 front panel came off and the power pins came out of the mb and I don't know the order the pw .sw .hdd. Go can some one help me
On the connector side should be a red wire (the red wire will be pin 1)
Look on the board (will be small) look for a #1 somewhere next to the pins and that is the end that the red wire would go
Hopefully this will help, if not in manual could be trial and error
All times are GMT -7. The time now is 10:45 AM. |