Changing light fixture- 2 separate wires in the ceiling (3 wire and a 2 wire)
I know this has been answered before but my situation is a bit different. Installing a replacement light fixture. In the ceiling are TWO separate wires. One is 2 wire plus ground and the second is 3 wires plus ground. Fixture has black, white, and round connection. I connected the two black wires together and pigtailed off it to the light fixture wire. I did the same for the whites. I capped off the red. I assume I need to cap off the black on the 3 wire plus ground wiring and then wire nut the red from the 3 wire plus ground wire to the black on the two wire plus ground wire and pigtail it to the black light fixture wire. Would this be correct?
Thanks for your help.