I want to get a 120 degree bend. What angle to I cut the two pipes that go together to make the 120 degree angle?
I want to get a 120 degree bend. What angle to I cut the two pipes that go together to make the 120 degree angle?
I'm thinking 60...
http://dcdrafting.com/Ads/cutangle.jpg
Dan has nailed it. Two 60 degree cuts will give u 120 degrees when put together.
Chuck
You can cut the pipes at any angle as long as the two added up make 120°, unless you want the centered cut look. Two 60° pieces are assuming that there is no obstruction I imagine.
If u cut different size angles, they will not match up. The larger angle cut will be longer then the smaller angle.
Chuck
All times are GMT -7. The time now is 05:54 PM. |