Working at some things at my dad's old house. At the kitchen sink, when water is turned on, water leaks out from where the faucet attaches to the base. When I unscrew it, it seems to be missing a washer. Correct?Attachment 49174Attachment 49175
Working at some things at my dad's old house. At the kitchen sink, when water is turned on, water leaks out from where the faucet attaches to the base. When I unscrew it, it seems to be missing a washer. Correct?Attachment 49174Attachment 49175
It well could be and that may fix the problem, but the washer in the piece your holding looks well pitted and shot in your picture so I would replace that one and see where your at.
Will give that a try.
Ahh, the infamous old house. If its anything like my house, I'd say burn it down and Start over.Quote:
Working at some things at my dad's old house.
Many of those older ones had an O Ring
Didn't have an O-ring, so I went with to washers I had. Used two since they were fairly thin. So far so good. I don't think it will hold up long, but long enough.
I suggest time for a new faucet, Thanks
John
Probably about right. It's working for now, but I don't expect it to last too long.
All times are GMT -7. The time now is 03:19 AM. |