I have a faucet question. I have a single handle Delta kitchen Faucet, when I bought it I noticed it had 2 water flow settings, but it was something you did when installing, it could be installed lower flow or higher flow. The plumber installed it on the lower flow. I don't mind low flow on the bathroom sinks but in the kitchen I prefer more power for washing pots and pans. Does anyone happen to know how I can change it to the higher flow?

Found the model... http://www.deltafaucet.com/kitchen/d...roduct-support

Quote:

---

Originally Posted by McParty

Found the mode so I hope this helps!.

Quote:

---

Originally Posted by McParty

Found the mode so I hope this helps!!... http://www.deltafaucet.com/kitchen/d...roduct-support

---

---

Maybe I just need the key, is this diagram saying it has 2 aerators?

Instructions indicate that there is a limit on the hot side that can be selected. This limits the hot side only, not the total volume.
To get full volume on the hot side remove handle with Allan wrench (key). Move handle stem to cold side and then move selector lever to the left (position 1) for full hot water flow.

Reinstall handle. Only one aerator