Removed Air Gap, Using Loop. Now there is a leak
Recently Removed the Airgap (which would have water coming from it). I am using a Loop now, the loop wraps up HIGH (touches the countertop). Since removing this, I see water at the front of the Dishwasher.
I took the Black Hose off the Garbage Disposal to check for blockage... none :/
I need to check for blockage in the hose itself though. I was wondering if there are other issues that can cause my problem. (I've done as much research as I could, hoping someone has some advice.) MassPlumber and Speedball always seem to have good answers ;)
Comment on ballengerb1's post
I'll check this tonight. Sorry for the late reply but the website was not letting me access any reply's. . said "3" replies, when I clicked it, it said "no one has answered." :/. . your feedback is appreciated
Comment on ballengerb1's post
By the way, I can't seem to edit the title and add dishwasher.. . is there a way to do this?
Comment on ballengerb1's post
Ran the dishwasher twice since this and no leak. Maybe it was just a coincidence. All seems to be fine. Thank you all for your feedback.