It's a Maytag gas dryer #LDG7304AAE. I replaced the belt.
When I put is back on, the heat does not work.
Gas line is open, vent is open, blower works. Timer works
And I did run it for 10 minutes in the hope it might start up later.
No success.:confused:

Quote:

---

Originally Posted by termina

Its a Maytag gas dryer #LDG7304AAE. I replaced the belt.
When I put is back on, the heat does not work.
Gas line is open, vent is open, blower works. Timer works
and I did run it for 10 minutes in the hope it might start up later.
No success.:confused:

---

Was the unit heating before you replaced the belt? If so you most likely
are looking for a wire that is not connected somewhere inside the cabinet of the machine
where you were working. Check that all of the thermostats have wires connected, and
look around the gas valve area. Retrace your steps and you should be able to fix.

X-Sears Technician