Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Just looking for some input on weil mclain ultra boilers (https://www.askmehelpdesk.com/showthread.php?t=341101)

  • Apr 13, 2009, 04:23 PM
    mygirlsdad77
    Just looking for some input on weil mclain ultra boilers
    Hey guys. If any of you have worked on or installed ultra boilers, what kind of luck have you had with them, and if you have had problems, what were they. Have you found draft inducers to be problematic? Any other problems you have encountered? If so, please let me know what you have found. (strictly in the boiler and controls themselves, assume piping is correct) Any input will be appreciated. I only ask this because I have had a couple draft inducers go bad on fairly new units(2 years or less). I just want to know about other possible (common) problems to check for in the future. Thanks for taking the time.
  • Apr 13, 2009, 06:57 PM
    csavage1

    I have had great luck with the Ultras and the Gold. I have installed at least a dozen oil fired and a few gas ones. The swinging door for cleaning is one of the great selling features. The only problem we had was when the powerventers would act up. They will handle 7 or 8 zones no problem.

    The other units we had a bunch of problems with was the Walton prevent power dampers. We did 224 gas Vailant boilers on some army housing back in mid 80's and there was at least 30 bad damper units.The small micro switchs would stick and shutdown all heat. The next biggest problem with that Vailant boiler was the small leads on the groundfous circ pump would be loose.
  • Apr 14, 2009, 03:17 PM
    mygirlsdad77

    Thanks for the info. We don't install oil burners here, only nat. gas and propane. Have you had any probs with the gas ones, specifically the inducers? I agree that the ultra(golds) are great boilers, but we have had a few issues with them. Just trying to determine whether to stick with them, or choose another brand.
  • Dec 24, 2012, 07:26 PM
    mygirlsdad77
    Okay, I just have to update. Sorry it has been a few years. I find that the early ultras did have a few minor issues. However, I have been installing many ultras over the last few years and have found very little if any actual product problems. I have over 30 ultras out there and the only issues I have seen is dirty flame sensor and plugged drain system (not including the early draft motors). I will admit that I did deviate from the install instructions on one or two boilers, and hence I had to go back and repipe according to the manual.

    So basically, the ultras are great (and I mean GREAT) boilers, to date. Install is key. It really isn't that hard to read the directions, its having the mental capability and experience to follow them that makes for a great boiler install.

  • All times are GMT -7. The time now is 12:07 AM.