Rwd does't work. Troy bilt mower. New belt and wheels. What's next?
I have a troy bilt model series 830. The drive wheels don't work properly. They will spin when the lever is engaged and the wheels are off the ground, but as soon as they touch the ground, nothing. I've replaced the belt and the wheels (one was broken). Adjusted the cable. It will loosen and tighten the lever. Which is the hand trigger on this model. What else could it be? It' a 2005 but only used for about 1- 2 years before the problem occurred. Always kept in doors. Maybe something's wrong with the cable or the spring on the bottom end, or the trans assembly? Any ideas?
Thanks