GFCI on breaker panel trips, 3 way, how to find the problem?
Periodically one GFCI in the panel trips
This particular circuit runs an outside outlet, one light in the basement and it seems to work 2 switches and a plug in the family room
The problem with the 2 switches in the family room at opposite ends are suppose to turn the plug off and on as a 3 way but it is not wired to work exactly right, could that be the problem?
From one end( switch A), if a light is plugged in to the plug socket controlled by switch A and B, you can turn it off and on, if its on, you can turn it off from the other end switch (B), and on again, but if the switch at end (B) is left in the off position you can not turn on again by flipping (A) again, which is what it should do as a 3 way, if I understand 3 way switching correctly.
Could this botch wired 3 way cause the GFCI to pop off and on, I didn't notice anything else wired to that circuit other than what I listed and one hall light.