The machine's tub will not turn. If it might be the transmission, how do I test it? The motor is good ( I took the belt off & the motor works fine.
Thanks for your help,
Karl
The machine's tub will not turn. If it might be the transmission, how do I test it? The motor is good ( I took the belt off & the motor works fine.
Thanks for your help,
Karl
Source: Appliance BlogQuote:
tilt your washer back and take the belt off, then turn your transmission pulley both ways, one way will make it agitate, the other way should make the tub turn, if the tub doesn't turn then the thrust bearing is bad.
All times are GMT -7. The time now is 04:39 PM. |