Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Desktops (https://www.askmehelpdesk.com/forumdisplay.php?f=427)
-   -   Problems with Desktop turning on (https://www.askmehelpdesk.com/showthread.php?t=798981)

  • Aug 11, 2014, 11:24 AM
    zman64
    Problems with Desktop turning on
    Recently I installed a new power supply in my desktop. Now when I turn it on the fans run ultra fast (faster than they've ever run before) and the monitor turns on says it has no active video connections and goes to sleep. If I let it run it will repeat this process. Sometimes after repeating this once or twice it will settle down and start up. Other times the new power supply has a switch on it and if I pop it off then on it will boot up. Either way when it does boot up the computer gives one single beep and the screen says something along the line of "default bios loaded checksum issue". I have checked and rechecked all my connections/ plugs not sure what's going on. Maybe motherboard? Once its on it seems to operate normally. Please help. Thanks!
    Some background for my PC... Its about 3-4 years old and about a month and a half ago I updated the GPU which has been running wonderfully. Other than the power supply I just put in no changes have been made.
    Specs:
    HP Pavilion Elite Case
    Asus Pegatron IPMTB-TK (Truckee) Motherboard (cant find anything on this mobo)
    Intel Core I7 950 quad core processor 3.07GHZ
    Seagate Barracuda 1.5 TB 7200 RPM SATA 3Gb/s Hard Drive
    12 GB DDR3-1066 MHz SDRam (6 Dimms)
    Creative Sound Blaster X-Fi Xtreme Gamer Audio Card
    Geforce GTX 660 FTW Signature 2 3GB GDDR5 Video Card
    Corsair HX 650watt
    Bluray Drive Brand?
    Windows 7 64 bit
  • Aug 11, 2014, 01:02 PM
    ScottGem
    I didn't think i7s have been around 3-4 years, but I could be wrong on that. In any case, are you sure the motherboard can handle the power supply?
  • Aug 11, 2014, 04:09 PM
    zman64
    Well as I said I cant seem to find any manuals or anything on this motherboard and in hunting around the net it seems I am not the only one with this problem. Are motherboard only rated for so much power? It has a 24 pin main and a 4 pin for the CPU if that helps... P.S. I bought this new 3 1/2 years ago time flies
  • Aug 12, 2014, 04:11 AM
    ScottGem
    Yes motherboards are rated for a minimum and a maximum power supply.

    I had no problem finding info about the board. Took me less than a minute:
    Motherboard Specifications, IPMTB-TK (Truckee) | HP® Support

    Unfortunately this doesn't list Power supply capacity. So try contacting HP.
  • Aug 13, 2014, 09:16 AM
    zman64
    Unfortunately HP wasn't much help however I posted on their forum and browsed the topics there since the motherboard is a HP product and my power supply that I installed has been used by other users with no problems and even higher watts have been used to no ill effect. So I believe that the motherboard is OK for the power I have given it. Any other suggestions? Thank so much!
    PS to Scottgem I had found this board around the net but no specs on it but what you found had abit on it good find and thanks! :)
  • Nov 18, 2014, 06:33 PM
    InfoJunkie4Life
    Open up the PC case and examine the capacitors to see if any are bulging at the sides or the tops are raised instead of flat. The erratic start is a common symptom of bad caps. Changing the power supply may have just instigated this. Furthermore you may try re-seating all of the connectors to make sure they are connected properly.

    Have the power supply tested. There are some things that go wrong with power supplies that some motherboards tolerate and others do not, such as PSON/OFF delays. A PC shop can test in minutes.

    The BIOS checksum error is generally caused by the BIOS RAM being reset, there is usually a battery on the motherboard that keeps its memory active. You may need to replace this. If you turn the switch on the power supply off then the battery would be the only source of voltage and if it is inadequate then it will result in a checksum error.

  • All times are GMT -7. The time now is 01:25 PM.