If you can see in the picture attached to this email,
There is a picture of a bathroom, this is how my tiles are set up.
There are 2 borders that stick out of the wall, the top one sticks out further than the other.

In the second picture attached, there is a mirror from a shop. (the middle one)
Since the border sticks out off the wall, is it possible for me to stick this type of
Mirror on this wall?
Would I need to stick some sort of brackets up
How would I go about sticking this type of mirror up?

Your help would be much appreciated
Regards
Jay

I sent this already in the plumbing section but they didn't really get it.
The top picture is a picture of my bathroom.
It's the only picture I have a t the moment but I stuck it up to give you an idea of how the tiles in the bathroom are set up.
The whole bathroom is done like this, with these type of borders.
If you can picture this,
The sink goes up to the bottom border in the picture.
The mirror will be going over this border and it will cover the top border.
Is there a way to put it up level?
Regards
Jay

You are stuck between a rock and a hard place on this. Either get a smaller mirror that will fit between the borders or plan on hanging the mirror from wires, which will not look good.