Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Pools - Spas & Saunas (https://www.askmehelpdesk.com/forumdisplay.php?f=261)
-   -   Unlevel pool (https://www.askmehelpdesk.com/showthread.php?t=105490)

  • Jun 29, 2007, 06:50 PM
    lanab
    Unlevel pool
    Our son put our 15 ft. round metal frame pool up today. I got home while it was filling. It is about 3 1/2 - 4 inches unlevel in an area. I have started draining it but can I prop the legs up that much? If not is there a way to fix the problem without taking the whole pool apart?
    Thanks
    S. Bell
  • Jun 30, 2007, 10:43 PM
    serendipity pools
    Major problem here. If your new pool is 3-4 inches out of level you need to fix this. Your pool could weight 75-100,000 pounds when full. Trying to block up the low side to be level with the high side is a risky proposition.

    Professional recommendation is to dig the high side down to the low side, basically starting over. Good luck with your project.

    Steve Goodale
    Serendipity Pools

  • All times are GMT -7. The time now is 07:33 PM.