Ask Experts Questions for FREE Help !
Ask
    bwilly's Avatar
    bwilly Posts: 42, Reputation: 2
    Junior Member
     
    #1

    Aug 20, 2018, 08:35 PM
    Rough in toilet
    I have a rough in for a toilet in my basement. I will not be using it and the "plug" is a tripping hazard. What can I do to remove the plug? Would it be correct to put cement in the drain for something else.
    Thanks
    ma0641's Avatar
    ma0641 Posts: 15,681, Reputation: 1012
    Uber Member
     
    #2

    Aug 21, 2018, 02:54 PM
    Of you will never use the drain rough, cut it flush with The floor, stuff newspaper in to form a dam and pour in 3-4" of Quickcrete.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Converting shower rough in to toilet rough in [ 5 Answers ]

I am in the midst of finishing my basement and have stumbled upon a roadblock. The builder has installed the rough ins in awkward areas. I would like to close off the toilet rough-in and convert the shower rough in to a toilet rough in. Is this possible?

8" rough in toilet [ 3 Answers ]

Some people say there is no such thing as an 8" rough in toilet,however two plumbers have measured this as have I and thats what I have. My question is this: Does anyone know of a supplier in Canada that has 8" toilets? Any place I have been to says there is no such thing(Home Depot,Kent among...

Toilet rough ins [ 6 Answers ]

Hi guys, I am in sales and I had a customer ask if he needed a 12 or a ten in rough if he was 11" from the wall. I think he needs 12 my co workers aren't sure what do you guys think? And how do I determine the differences? :confused: Thanks ami

How do I replace a 10in rough in toilet with a 12in toilet [ 2 Answers ]

I have new 12in one piece toilet that I need to fit in a 10in rough in space.

Need to replace toilet, rough-in 20" from the wall, toilet has four mounting holes [ 3 Answers ]

In a nutshell, we need to replace our existing toilet. However, the toilet has a rough-in of about 20"+ to the closet flange and the toilet has four mounting holes on the base. The toilet is connected to the closet flange via the front two holes (and nothing in the back two holes). I bought the...


View more questions Search