Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Basement toilet drain 14" from wall :(
[ 4 Answers ]
Am tackling putting in a bathroom in the basement. Walls are already up, but I noticed now that the center of the drain for the toilet is around 14" from the studs (drywall yet to go on). Is a seemingly simple installation now going to be a more major undertaking? I'm relatively new at this and...
10" rough in Handicap toilet
[ 7 Answers ]
I want to replace an old toilet with a handicap model but the old toilet has a 10" rough in and the new ones all seem to be 12". Does anyone make a handicap toilet that will fit a 10" rough in? Thanks
Need a ROUND 14" rough toilet that is 16' high.
[ 3 Answers ]
I'm in an old house. Need a ROUND 14" rough toilet that is 16' high. Thanks, aow
Toilet tank 4" from wall
[ 1 Answers ]
My contractor recently installed basement toilet I just bought. It looks like the tank is 4 inches from the wall. From your site I measured the roughin dimension and it looks like it is close to 13 and 1/2 inches and I bought a toilet with a 10 inch rough-in. Do I simply need to replace with a 12...
Mounting new toilet
[ 2 Answers ]
I am remodeling our bathroom. For the floors I will be using Hardy Backer cement board, 1/4" thick. On top of that I will be laying ceramic tile. My question is this; When installing the new toilet, do I leave the toilet mounting ring as it is now, or do I remove it and reinstall on TOP of the... View more questions Search
|