Where is the image you are talking about to the question... how to vent a dishwasher.

Hello Jimcherie,
You are asking about a year old post, if you have a problem or a question please start a new thread one of the experts will respond tour question, Thanks.
John

Quote:

---

Originally Posted by ;

I read your instructions and will go with that, but your images are no longer in this thread. Do you still have them? Can you re-post them or email them to me?

---

If local codes allow, you may forgo installing an air gap and install the drainage hose with a large loop between the point where it discharges from the dishwasher and enters the sink drain. Think of a bell-shaped curve. Make sure to attach the drain hose as far up in the cabinet as you can, using hose clamps or a pipe strap to secure it, when you run it between the dishwasher and the disposal.
Your drain hose MUST be looped higher then the flood rim what you are discharging into. All that means is when you run the line, strap it up so the loop is above the inlet of the disposal or whatever you are draining into. If this is not done the water that you discharge from the sink will drain back into your dishwasher. Iuse a 3/4" copper pipe strap to secure but a nail and some wire wil;l work also. Some models may have an outlet attached to the top, but most of them will have to be strapped up. Hope this helps and thank you for rating my reply. TOM