Got sidetracked this week but here is the sinks completed less the venting...I'll message you, thanks!https://uploads.tapatalk-cdn.com/201...5edc3e5fd5.jpg

Sent from my SM-N975U1 using Tapatalk

Nice job...looks great!

Except for the rest of the pex supply lines, this wall is done. This was a tough one. https://uploads.tapatalk-cdn.com/201...72199c3fbd.jpg

Sent from my SM-N975U1 using Tapatalk

It was a lot of work, no doubt...drilling large holes is a blast, huh??

You did a nice job here...very clean.

For the toilet plumbing, does this look right?

4x3 closet bend to 3x3x2, with the 2in vent going up the wallhttps://uploads.tapatalk-cdn.com/201...ea8feab60e.jpg

Sent from my SM-N975U1 using Tapatalk

Tee goes in the other direction (flip it)...with the flow so water/condensation build up flows down the drain.

Otherwise, fine.

I like to use a 3" 90 and then install a 4"x3" stainless steel ringed closet flange but what you have there is fine as well.

Slow but steady lol

Working my way towards tackling the fernco fitting that needs to go.https://uploads.tapatalk-cdn.com/201...fd885e7c0d.jpg

Sent from my SM-N975U1 using Tapatalk

You follow directions well....nice job.