Quote:

---

Originally Posted by massplumber2008

HI Wolverine...

This post goes back to 2009, so doubt bjamm will be back anytime too soon.

Can we help?

---

I am back! :)

I can post pics of my final setup if you like.

I did get everything up and running back about halloween of that year and its been great ever since. Although I did have to get an ice machine to cut the hassle! :) I can post pics/give advice where I can... once its all setup its really not too bad to get up and going. Im about to redo my syrup and water lines this coming week to make them a little longer so its easier to do maintenance behind the machine.

Hey hey Bjamm...

If you want to post pics. I am sure others will find it helpful down the road, for sure!

Did you end up installing a RPBP?

Back to you...


Mark

The drain should have 2 hoses... 1 from the soda,1 from the ice bin... they need to drain by gravity.. so the washer drain needs to be lower then your soda fountain... otherwise you need a pump... the soda drains into the pump and the pump pushes waste up to the washer drain,very cheap(40 bucks)and easy install

These dispensers only need to be licensed if for commercial use. Installed a lot of these in delis, convenience stores, etc. Proper plastic piping is necessary. If one were to look inside of one of these , you will find NO COPPER. All web reinforced PVC hoses.