Sorry, pry wasn't the right word. I've tried wire-brushing as much as I can (it's very hard to get around it with the vent in the way. I will try some wd-40 as well. Thanks, I'll keep working at it.

I finally got this job done. The nipples were a real PITA to get out but after that, it was pretty easy. Thanks for all the help!

Augy:

About time you posted back....I have been concerned all day!

So you are all set.. AWESOME!! You did the work... but thanks for update... I know we all like to know results!

Pop by anytime... Mark

Quote:

---

Originally Posted by massplumber2008

Augy:

About time you posted back....I have been concerned all day!!

So you are all set...? AWESOME!!! You did the work....but thanks for update...I know we all like to know end results!

Pop by anytime...Mark

---

Yes, it all came out fine. It took most of the day and several trips to the hardware store. By the way, I am now the biggest fan of those copper fittings with the solder built in (they have ridges with solder in them). Wow, the results of those sweats were fantastic and very, very easy (just heat about 45 secs and done). I had to fight a leak that turned out to be a faulty seal on one of the flex fittings so one more trip to the store. I am forever grateful to all the advice given on this forum. I'll go back and rate you guys for all the help. Thanks again!

Congrats Augy, you are invited to the next plumbers ball.