Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Patch hole in bottom vanity sink (https://www.askmehelpdesk.com/showthread.php?t=220918)

  • May 28, 2008, 08:25 PM
    tyfast
    Patch hole in bottom vanity sink
    I bought a vanity sink over two years ago and just installed it. Well when the mold was poured there must have been a air bubble when they poured it, in the bottom of the sink where the sink overflow runs into the drain ( about 1 1/2 inches from drain). It is about half the size of an pencil eraser that I need to patch with something.
  • May 29, 2008, 03:09 AM
    KISS
    My suggestion is fiberglass. Kit at auto parts store - follow directions.
  • May 29, 2008, 04:11 AM
    speedball1
    Quote:

    Originally Posted by tyfast
    I bought a vanity sink over two years ago and just installed it. Well when the mold was poured there must have been a air bubble when they poured it, in the bottom of the sink where the sink overflow runs into the drain ( about 1 1/2 inches from drain). It is about half the size of an pencil eraser that i need to patch with something.

    You gave us all the information except the material the lavatory is made of. Plastic, fiberglass or china? Regards, Tom

  • All times are GMT -7. The time now is 01:05 AM.