Quote:

---

Originally Posted by dallan6959

Easiest way!!!

if you are taking out the alarm panel and no longer require the cable to the panel, undo the red and green wire and the yellow and black (this is the white cable going to the panel) and move all the white wires over under the red screw down terminal and the blue wires over under the green screw down terminal

all the white cable is doing is taking the line into the alarm panel and sending it back on the yellow and black, this is so that the panel has priority over the phone line if it needs to dial out when the alarm is tripped

Dallan

PS i work on phones:)

---

This did the trick! Thank you

Thanks to all who posted to help out! Much appreciated...

KISS, you're THE expert! I had the same problem as the original poster, and found this thread via Bing. I just tried out your suggestion
"Connect RED to YELLOW
and
Connect GRN to BLACK"
And my phone which was dead is back again! Thank you thank you thank you