Quote:

---

Originally Posted by mongoose102860
Well it is bed time. I will get back to you. Thanks. Just keep advice coming.

---

You mention drawer fillers. Are you also wanting to paint the insides of the drawers? If you are intending to do that, you might want to reconsider.

I apologize for all of the questions. It's just that we need to get down to the nitty-gritty of this. Of course it would be a lot easier if I was just speaking with you. But, right now, this is the best that we can do.

It has been a pleasure communicating with you! And, I hope to do so again!

I'm still here and I should be in bed also. I will be on here after 10:00 P.M. my time tomorrow night. Where are you located?

Right now, because of the questions that I have asked you and also because of the answers that you have given, I am really leaning towards you brushing the surfaces that need to be painted. But now, you have mentioned drawer fillers. So, masking things off may not be an issue.

You see, in order to spray surfaces, you know that you need to mask off the areas that you don't want to be painted. Masking off properly can take a great amount of time. It may be time that might be better spent in applying the finish to the surfaces that you want to be painted. Also when you use a spray gun, before and after spraying you are always going to have to be maintaining the spray gun and also seeing if it is going to be operating the way that you want it to. That also takes up time that might have been better well spent just applying the paint with a brush.

Then there is also the issue of setting up everything properly for spraying...

It's easier to set things up for brushing.

I'm not saying just use a brush just yet...

1 - Doors are already off.
2 - I am in Virginia
3 - Talk to you 10pm your time. And your location is?