Ask Experts Questions for FREE Help !
Ask
    shelby349's Avatar
    shelby349 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Nov 19, 2012, 06:58 AM
    Coleman gas furnace reverse polarity problem
    I have a coleman gas furnace model dgat056bdf-- I got a flashing code for reverse polarity-reset panel- glow plug came on and soon as the burner came on it went back off with reverse polarity code. Remove burner assembly and cleaned flame sensor ,now unit will run for a day or so and go back off with the reverse polarity alarm. Any suggestings on what would cause this? Thanks
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Nov 19, 2012, 10:55 PM
    I have a coleman gas furnace model dgat056bdf-- I got a flashing code for reverse polarity-reset panel- glow plug came on and soon as the burner came on it went back off with reverse polarity code. Remove burner assembly and cleaned flame sensor ,now unit will run for a day or so and go back off with the reverse polarity alarm. any suggestings on what would cause this? Thanks

    If possible reverse the 24 volt feed from the low voltage transformer to the circuit board and see if that helps your situation.
    shelby349's Avatar
    shelby349 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Nov 20, 2012, 04:38 AM
    Quote Originally Posted by hvac1000 View Post
    I have a coleman gas furnace model dgat056bdf-- I got a flashing code for reverse polarity-reset panel- glow plug came on and soon as the burner came on it went back off with reverse polarity code. Remove burner assembly and cleaned flame sensor ,now unit will run for a day or so and go back off with the reverse polarity alarm. any suggestings on what would cause this? Thanks

    If possible reverse the 24 volt feed from the low voltage transformer to the circuit board and see if that helps your situation.
    Thanks for the info will change wiring
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman dgat056bdf furnace reverse polarity signal [ 0 Answers ]

What would cause a reverse polarity alarm code on a coleman dgat056bdf gas furnace

Reverse polarity issue or circuit board problem? [ 11 Answers ]

My goodman pgb03075-1a stop blowing air. Took it apart and saw no flame when auto ignition fired 3 tries. It shuts off then led light constantly flashes. Not one of issues listed. Called goodman co. They said it was reverse polarity how do I fix?

Carrier Furnace Says Reverse Polarity Only In Heat Mode [ 5 Answers ]

I have a carrier furnace that says reverse polarity in heat. In cool it works fine. I replaced the control board last year and it worked fine all winter. This year I checked it a week or two ago to make sure it would work OK before I actually needed it in case I needed to order something. It...

My york furnace is reading a fault #9(Grounding or reverse polarity fault)? [ 0 Answers ]

My furnace is reading a #9 fault, which the legend says it's a grounding or reverse polarity fault. I have power in, 120V at the transformer as well as 24V, there is a call for heat and 24V at the R & W terminals. Is there any input anyone can offer me? Thank you.

Reverse polarity [ 1 Answers ]

When does reverse polarity occur?

View more questions Search