This question pertains to an industrial ice machine. It is an Ice-O-Matic, 208-230, model # ICE1406HA2. The unit has been recently cleaned. It is also running fine and all pressures are were they are supposed to be. The machine makes ice with no problem, and harvests about every 20 minutes. The problem is that when it harvests both doors do not seem to reset. There have been 6 ounce fishing weights that have been on each door for about 8 years, and it was working fine. Yes the machine is level. It appears that the linkage that is on the doors is not operating properly. Does this mean there is a problem with the micro switches as I have no manuals or wiring information.