No, but the compress may still be out on overload, does it hum or do anything?
No, but the compress may still be out on overload, does it hum or do anything?
Well the motor just burnt up
That's not good, I would say your compressor will be fine if you get a new motor
OK thank you again for all of your help, I'll get a new motor tomorrow from a local vendor.
Eugene
OK let me know if it turns out OK.
Well I replaced the motor but still does not work. They gave me a new compacitor but its doesn't look the same. My old one had 3 prongs and this one only has two will that work?
Ok I replaced the capacitor and now the fan works but I'm not sure that I have everything wired up correct.
From the new motor
Black, White, and brown
Spliced into
Black, red, yellow w/brown stripe
I now have two capacitors
35/5 440volt Red wire on the "C"
5mfd.370 volt w/ yellow w/black strip and Orange on it.
Is this correct because it doesn't sound like the compressor is working?
How many wires does your new motor have?
I`m hoping yo didn`t try to replace the original capicitor with the one they sold you with the motor,, the new one should have been only for the new motor and the original left in place for the compressor to operate off,,
Maybe I`m understading wrong
You should have 2 wires on the new compasitor and 3 on the old.
All times are GMT -7. The time now is 11:05 AM. |