Foxconn mbd up to 3 Year Warranty available
Model 6100K8MA-RS Retail Boxed Main board
Supported CPU
CPU Socket Type AMD Socket 939 Socket Dual Core support - OEM
AMD ATHLON 64 3700+ PROCESSOR INCLUDED
Heatsink with Fan included
Motherboard Supports Maximum CPU Support any 939pin cpu in Market today
ATHLON 64 3700+
FSB 1000/2000MHz Hyper Transport
Chipsets
North Bridge NVIDIA GeForce 6100 CPU + nForce 410 MCP
Memory
Number of DDR Slots 4x 184pin DDR
DDR Standard DDR 400 (PC 3200)
Maximum Memory Supported 4GB
Dual Channel Supported Yes
Expansion Slots
PCI-Express x16 1
PCI-Express x1 None
PCI Slots 3
Storage Devices
PATA 2 x ATA 133 up to 4 Devices
PATA RAID None
SATA 2 x SATA2 300
SATA RAID NV RAID 0/1/0+1 JBOD
Onboard Video
Integrated Video Integrated NVIDIA high performance graphic controller up to 128mb shared memory
Plus PCIe x16 slot for future expansion
Onboard Audio
Audio Chipset AC97 Codec
Audio Channels 5.1 Channels
Onboard LAN
LAN Speed 10/100Mbps
Max LAN Speed 10/100Mbps
Rear Panel Ports
PS/2 2
COM 1
LPT 1
USB 4x USB2.0
IEEE1394 none
S/PDIF Out none
Audio Ports 5 jacks
Onboard USB
Onboard USB Connectors 4x USB2.0 (2x headers)
Onboard 1394
Onboard 1394 Connectors none
Physical Spec
Form Factor ATX
Dimensions 12.0" x 9.6"


I just bought this barebone PC , installed a cd rom, floppy , and Seagate / 250GB / 7200 / 8MB / ATA-100 / EIDE / OEM / Hard Drive, and two dimms of pc3200 2x256. The PC recognized all the hardware. I went on a installed Windows XP Pro 32bit, retail, went through all the setup process. Installed successfully. When I restarted the PC, it wouldn't load xp , and a white cursor just jumping on the screen.

Yesterday I left the PC on after I saw the cursor blinking, and when I came back after3 hrs( opprox) , windows had loaded. So I thought everything should be fine, thus restated the PC. But again the same thing, just don't want to load os... is something wrong with my hd... any help would be appreciated. Jus to let u know on startup the bios recognized all the hardware.

HELP :-(

Ensure your cd rom drive is installed as secondary master, and the Seagate as primary master. Putting a cd rom and hard drive on the same cable gives very bad performance. Set jumpers to master position, don't use CS (cable select) position.

Disconnect the floppy, reboot Also Ensure that the floppy cable is plugged in correctly. Pin 1 to Pin 1.

Disconnect the cd rom, reboot.

Do you have any external usb devices connected? Disconnect it.

Try installing only 1 stick of ram. Try each individually and in each slot.

What are you using for video? Onboard video?

If you can get into the bios, load default bios settings.