The chain on the fan switch broke of and I bought a replacement at HomeD. I forgot to tag the wires and can't seem to properly connect the 4 wire to the new switch. Cable colors are: White, Black, Yellow and Blue and the switch has an "L", #1, #2 and #3 where the cables should be connected....

I removed the speed switch without marking which wires went where. It is a Hampton Bay. Any suggestions as to where a diagram or adivce can be found for the wires? Thanks in advance. Edie

I replaced the pull chain on my 3-speed ceiling fan and forgot to write down the color coding of the wires going into the switch. The switch is marked 1,2,3,L. The wire colors are; black, orange, yellow, purple. Where to they go?

Looking for information on how does 5 speed fan rotary switch for a ceiling fan increase and decrease the fan speed at any given time.

I have a ceiling fan that is approximately 20 years old. I took out the speed control switch, and thought I remembered where the wires went. The switch has two holes per connection. It has Line, 1 2, 3. Apparently I didn't put the wires back correctly. I only get two speeds - high and low. There...