Ask Experts Questions for FREE Help !
Ask
    milovanj's Avatar
    milovanj Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 14, 2010, 06:37 AM
    Can install two different 480v three phase feeders in same conduit?
    Ihave 480V three phase feeder 30 Amps installed.Iwant install another feeder same as that installed in the same conduit.Can NEC permit this?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Oct 14, 2010, 08:27 AM
    Before I answer, are you a licensed, qualified and trained electrician?

    Should be, if working on 480 volt 3 phase.

    And if so, you should know the answer.

    Please explain your situation.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #3

    Oct 14, 2010, 09:43 AM
    Quote Originally Posted by tkrussell View Post
    Before I answer, are you a licensed, qualified and trained electrician?

    Should be, if working on 480 volt 3 phase.

    And if so, you should know the answer.

    Please explain your situation.
    Agree!
    +1
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can I install a 600 volt single phase circuit in a underfloor concrete raceway with l [ 1 Answers ]

Will the 2008 NEC allow me to install a 600 volt single phase circuit in an underfloor concrete raceway that also has lower voltage control cables if a plastic divider separates the higher voltage wires from the control cables?

Single phase vs. 3 phase power - what makes 3 phase more efficient? [ 1 Answers ]

Hi, What is it that makes 3 phase power more efficient? Suppose I need an air compressor for a printing shop and I can choose between a 7.5HP single phase and a 7.5HP 3 phase. Ignoring that the cost of the motor is a little less for 3 phase, why is the motor more efficient and how does...

How to go from 200Amps/208V/3 phase to 600Amps/480V/3 phase [ 2 Answers ]

I am starting a business and have equipment that requires 600Amps/480V/3 phase, but the site I want to rent has only 200Amps/208V/3 phase. Is there anything I can do to get the required power on that site? Any equipment I can buy to achieve this goal? I understand it may be costly. Thank you.

View more questions Search