I am adding a new circuit of lights, and I want to know if this way will be OK. -The supply from the panel enters the first fixture. The black supply is connected to 1)the white wire of the switch leg 2) the black of the leg that runs power to the next set of lights. The supply white is connected...

Rewired existing lights for a friend which had a 3 way switch installed to it and other leads to other lights, when I added a switch to one of the lights to remove it from the 3 way SW it worked fine but ended up removing power to the other lights downstream. What went wrong and how do I fix it?

Unusual problem here.. I have regular ceiling lights, wired with two 3-way switches. My garage door opener (Craftsman) has a add on that would allow me to use my remote to turn on or off a lamp inside the home (outlet that switches on and off with the remote, basically a 2-way switch, either...

I need a wiring diagram for wiring in three switches in the same box all switches are for different lights.

I am working with a bathroom light above the sink and a fan light combination. It has a hot wire to a junction box. How do I wire it? Trying to replace what was there but in moving the box the switch does not turn off.