Ask Experts Questions for FREE Help !
Ask
    sans369's Avatar
    sans369 Posts: 2, Reputation: 1
    New Member
     
    #1

    Feb 23, 2011, 06:04 PM
    Can I use 8 2 wire with a double pole breaker if so how?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #2

    Feb 23, 2011, 06:15 PM

    How about some more detail?

    What are you wiring?
    What is the draw?
    Why #8?

    What exactly do you mean by "how"?
    sans369's Avatar
    sans369 Posts: 2, Reputation: 1
    New Member
     
    #3

    Feb 23, 2011, 07:38 PM
    Stan,
    Thank you for takeing the time to answer my question.
    I am wiring a cooktop that is either 208 or 240 volts. Electrcian ran wire but is gone long story. Am homeowner with my carpenter who has done wiring in the past. Am confused because always thought you needed three wire for 220. Was told you can use white wire as second leg rather than as neutral. Is that corect?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #4

    Feb 23, 2011, 09:12 PM
    If the cooktop is straight 240V you don't have a neutral, black and white are conductors. Retask the white through the breaker and mark it with black tape. If the cooktop is 120/240 you will need a 3 conductor with a neutral.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Double pole breaker [ 3 Answers ]

Have a breaker it has two breakers 15amp each 30total. Both poles are ganged together so both trip together. Have loss power in six outlets. The others are okay. The breaker is reset. But still missing power in Part of the circuit. Should I replace the two pole breakers, since part Of the...

How to wire a 20 amp double pole breaker using 10/3 copper wire [ 1 Answers ]

I have a water pump I would like to wire for 208 /220v. I have 10/3 copper wire. I need to wire the circuit breaker for the 208 / 220 v and connect the pump.

How do I wire a 10/2 wire to a double pole Breaker for 240 V? [ 6 Answers ]

I have recently baught a construction heater to wire into my garage. When speaking to the electrician at the store, he gave me all the advice my friend (who is a master's electrician) did. When I got home, I noticed that the wire he sold me to connect to a double pole Stab-lok 30A breaker was a...

Connecting a Double Pole Breaker [ 1 Answers ]

I have to start a motor by energising a Contactor, and I have only positive 24 volts dc,but the connection needs positive as well as negative 24 vots dc. How can I get Positive,negative 24 volts dc from only positive 24 vols dc..

One pole of untied double-pole circuit breaker breaks [ 5 Answers ]

I recently purchased a new dryer (220 v appliance) to replace an older model. The old dryer was connected to the panel via a double-pole breaker except that there was no clip or tie between the poles. I changed the location of the outlet when installing the new dryer, replacing the cable with the...


View more questions Search