Ask Experts Questions for FREE Help !
Ask
    Eltumi's Avatar
    Eltumi Posts: 7, Reputation: 1
    New Member
    		  
    #1

    Nov 20, 2012, 04:55 AM
    Generator
    How do I size a generator to start an induction motor driving a pump? (Example)
    sinnadurai's Avatar
    sinnadurai Posts: 127, Reputation: 2
    Junior Member
    		  
    #2

    Nov 21, 2012, 03:25 AM
    It depends on the type of starter used whether DOL,star-delta,AT,soft start etc.For DOL starting you will need larger generator as starting current is 6 to 8 times FLC.
    Refer www.my electrical.com/starting methods for induction motors.
    sinnadurai's Avatar
    sinnadurai Posts: 127, Reputation: 2
    Junior Member
    		  
    #3

    Nov 22, 2012, 03:15 AM
    Quote Originally Posted by sinnadurai View Post
    It depends on the type of starter used whether DOL,star-delta,AT,soft start etc.For DOL starting you will need larger generator as starting current is 6 to 8 times FLC.
    Refer www.my electrical.com/starting methods for induction motors.
    It should be www.myelectrical.com/starting methods for induction motors
    sinnadurai's Avatar
    sinnadurai Posts: 127, Reputation: 2
    Junior Member
    		  
    #4

    Nov 23, 2012, 03:48 AM
    Try Motor Starting - Summary
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to run well off generator [ 1 Answers ]

How can I hookup generator to run 220 water well when power go`s out?

Generator [ 3 Answers ]

Hooking up 30 amp 4 wire generator cord to house main box. My main box has 2 hot 120v each and one grounding bar for white and copper grounds in the house.. I understand black and red go to the 2 pole breaker but white and ground go to the grounding bus bar ?or do I leave one off? ...

Generator wiring: new generator gfci breaker tripping [ 2 Answers ]

Generator wiring: I have a new honda generator. I ran 3 wires from the garage to the transfer switch in the house. When I start up and throw in the breaker on the generator, its GFCI trips immediately. It is a long run (125ft) run to the house and I used heavy wires. But I only ran 3 (blk,...

Connecting Generator to Generator Transformer. [ 0 Answers ]

For connecting 7 MW generator to generator transformer, which is better cable or NSPB ?

I require for a Power Plus 5000 Generator 1 generator under following specifications: [ 1 Answers ]

I require for a Power Plus 5000 Generator 1 generator under following specifications: 5000 Watts, 120V, 1 Phase, 60 Hz at 3600 RPM, 3720 RPM at no-load. Thank you, Publio

View more questions Search