Ask Experts Questions for FREE Help !
Ask
    NorPlan's Avatar
    NorPlan Posts: 427, Reputation: 3
    Full Member
    		  
    #1

    Jun 26, 2015, 04:49 AM
    Arrow Brand / Metal Shed / Doors?
    Have just Assembled an 8' X 6' Metal Shed Mfg. by Arrow Sheds.. The Doors are the Issue.. I assembled the shed with Care and to the letter of the Installation Manuals.. Problem Getting the Doors to slide Open / Closed without Yanking the BeeJeepers out of them.. Have installed & adjusted the Doors to sit flush when closed..

    This is is not the First Metal shed we've had so I know the Doors can sometimes be a bit Tricky.. This shed just happens to be the First One we've assembled out of the Box.. lol.. Just looking for Tips or Tricks on making the Doors slide smoother on the Track as one Push / Pulls the Doors.. One needs the Two Handed Approach to find the sweet spot if you will in the process... Thoughts & Ideas Appreciated, Cheers Thanks
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
    		  
    #2

    Jun 27, 2015, 07:42 AM
    Check for obstruction in top rail. Spray wheels with WD40. If this works use lithium grease for a more permanent solution. Will have to clean and redo about once a year.

    Chuck
    NorPlan's Avatar
    NorPlan Posts: 427, Reputation: 3
    Full Member
    		  
    #3

    Jun 27, 2015, 08:27 AM
    Quote Originally Posted by creahands View Post
    Check for obstruction in top rail. Spray wheels with WD40. If this works use lithium grease for a more permanent solution. Will have to clean and redo about once a year.

    Chuck

    Thanks... I'll try the Lithium Grease.. There is No Wheels, It's just a U-Shaped Aluminum Track Top / Bottom.. The Top has square plastic blocks with a series of holes so you can adjust for the doors to sit level... The Bottom only has hard plastic U-Shaped Tabs that only face inward... Cheers Thanks...
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Plastic vs Metal shed [ 7 Answers ]

I am going to buy a storage shed (10'x12' size) for my backyard. Saw there ar some plastic ones and metal (galvanized steel). So, I wonder which are more reliable/durable? Thanks.

Dead bolt installation in a metal door specifics, Can it be done to all metal doors? [ 2 Answers ]

Can all you install a deadbolt in all metal doors. Or are there some with foam core construction that you should not attempt installing a deadbolt. If it is possible on a metal with foam core residential door (1987 construction) Do the screws that hold the deadbolt to the edge of the door...

Wiring my metal shed [ 1 Answers ]

I am currently looking to wire a 12' X 20' metal shed detached from the house. The panel box is approximately 120' from the shed. I will have no major tools running at any one time. I plan on running wire above ground from the panel under the double wide then go underground the rest of the way....

Arrow Brentwood Storage Shed 5x4 in back of apartment? [ 2 Answers ]

Hi, could anyone please tell me me if assembling a storage shed in the back of an apartment is doable without the need for some kind of an anchor kit, and still have it stand in one piece on a mild windy day? Home Depot website at: Arrow Brentwood 5 Ft. X 4 Ft. Storage Building - BW54 at...

Painting metal on shower doors [ 2 Answers ]

Updating an outdated bathroom. The shower doors have gold trim. Is there any way to paint the metal and not have the water damage it?

View more questions Search