K iwill do that but at a later time cause its raining right now but again thanks for your patience

Ok no problem, did you see the picture I posted?

Keep me posted

Any thing New with this?

Hey mechanckid
The jeep did start once again the thing about it was ,I read the check engine code trick thing where you turn the key to on and off 3 times.. anyways it said that the battery was not connected which it was.. so out of curiosity and for the last time before I gave up I disconnected the red wire which is connected to the fuse underneath the steering wheel ,right beside the brake pedal and to my surprise it worked.(I hope this is the problem lol).but thanks a million for your help much appreciated!

Nice, well just for the next guy, you should have mentioned that your check engine light was on ;)

Not sure what you did, maybe there was a security system malfunction or a auto start system?
Any ways

Goodluck

No, the check engine light was not on.. here let me explain,on jeeps u can figure out the codes by the check engine light.. u simply put the key in the ignition turn to on and repeat 3 times the 3rd time around leave it in the on position(off-on,off-on,off-on)after a while the check engine light will blink at you telling you the code ,for example 1 blink is 1 two blinks is2 and so forth (there will be a pause between the two digits and there is only two digits)after these two digits it will always clear itself by 55 (5 blinks followed by 5 other blinks)... Check Engine Light this link will show you the chart and probably will explain a bit better anyway thanks for all of you for yhe support needed:):):)

Oh I know all that, I just thought it was on... haha

Have fun