Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Cars & Trucks (https://www.askmehelpdesk.com/forumdisplay.php?f=41)
-   -   Airbag code 41 (https://www.askmehelpdesk.com/showthread.php?t=841303)

  • Oct 7, 2018, 01:41 PM
    railz
    Airbag code 41
    1. on a 94 mercury marqui the airbag is flashing a code 41, what is this code?
  • Oct 7, 2018, 05:37 PM
    ma0641
    B1941 41 RH primary crash sensor feed/return circuit open GO to DTC B1941.
    DTC B1941: RH PRIMARY CRASH SENSOR FEED/RETURN CIRCUIT OPEN- LAMP FAULT CODE 41


    The air bag diagnostic monitor periodically pulls the voltage at Pin C276-16, Circuit 617 (PK/O) low to verify the connection to Pin C277-24, Circuit 624 (Y/W). If the voltage at Pin C277-24, Circuit 624 (Y/W) does not pull low as a result of this test, the air bag diagnostic monitor will store in memory DTC B1941 and flash lamp fault code 41 on the AIR BAG indicator. If the connection between Pins C276-16, Circuit 617 (PK/O) and C277-24, Circuit 624 (Y/W) is later serviced, DTC B1941 will be stored in memory.
    Possible Causes
    Failure to get low voltage at Pin C277-24, Circuit 624 (Y/W) during the test can be caused by:
    • an open circuit in the wiring harness in either Circuit 617 (PK/O) or Circuit 624 (Y/W).
    • an open circuit inside RH primary crash sensor across Circuit 617 (PK/O) or Circuit 624 (Y/W).
    • a short to battery or ignition voltage in any of the Circuits 617 (PK/O), 619 (PK/W), 624 (Y/W), 625 (Y/LG).

  • All times are GMT -7. The time now is 01:00 PM.